Think you’ve “heard it all” when it comes to making gold in World of Warcraft?

Well, if you haven’t checked out the strategies of the guy people are calling the “most hated player” in WoW, you don’t know it all just yet…

He has the gold-selling companies freaking out over the secrets he’s been sharing!

Just look at what some of the people who are using his strategies are saying:

“I look fwd to trying more of your tips out. I sold a couple ******* for 25g a piece. great tip! I cant wait to try some more out.”

-Andrew

“Love the Book, very informative, makes me realize the importance of … have made 500 gold in two days just by… “

-Tobias S.

“I tried out the ****** on my 40 rouge and got a ton of cash just off the ***** not to mention all the greens and general vendor trash that dropped. Great tip! I cannot wait to try out another!”

-Derek

You can check his secrets out for yourself here:

Link

Best of all, these secrets are 100% game-legal and won’t ever put your account at risk.

Later,
Mike

P.S. The gold sellers are NOT happy that these things are being made public, hurry and grab them before they get pulled forever!

When your CD or DVD (disc) drive starts giving you problems, your first thought may be to replace it or take it to the repair shop, but a good cleaning may be all it needs.

Below are three methods to clean the disc drive. The easiest method is the least effective. The hardest method is the most effective. Since the hardest method takes some time to do, I recommend that you start with the easiest method. If it solves your problems, congratulations. If not, try the next method.

The Cleaner Disc method – this, the easiest method, uses a special cleaner disc which can be purchased in computer stores. The disc usually comes with a little bottle of cleaner solution. Apply a few drops of the solution to the disc and insert it in the disc drawer (be sure to read and follow the instructions that come with the cleaner disc). The drive will turn the disc and clean the lens. Unfortunately, this only works adequately about half the time.

The Cleaning Stick method – this is what I do in desperation when the cleaner disc does not work and I don’t want to disassemble the drive. Since all that is needed (at least in my mind this is true) is a little more pressure applied to the lens, I start out in search of a thin, flexible stick of some type which is at least six inches long. It should not have sharp or rough edges that would scratch the lens. Next, get a soft, thin cloth and put water or rubbing alcohol in the middle of it. Place one end of the stick under the wet part of the cloth and slide it into the opened disc drawer. The goal is to rub the wet cloth on the lens to clean it. Do not apply so much pressure that you will scratch and ruin the lens. Also try blowing into the disc drive to remove any dirt that may have accommulated in it. If you do not succeed at this, proceed to the next method.

The Disassembly method – this method should work but it requires you to disassemble the drive. So if you are not comfortable with taking the drive apart, please take it to a computer repair shop and let them do it.

Take the cover off your computer, unplug the cords from the back of the disc drive, remove any screws holding it in, and slide it out (you may need to remove the face plate on the end of the drawer to get the drive out). Remove the screws in the drive housing and take the cover off. The bottom side of the drive is a circuit board, so if that is what you see when you take the cover off, figure out how to access the other side. On the correct side, you should see a lens that runs on a track (there is no harm in moving the lens along the track but do not touch the lens itself). Use a wet, soft cloth to clean the lens.

Sometimes a disc drive malfunctions because there is too much dust or debris in it, so be sure to clean out the inside with either compressed air, a soft cloth, or a cotton swab. Reassemble the disc drive, put it back in the computer case, and cross your fingers. Hopefully, it will work when you turn on the computer.

If these methods work, you just saved yourself some money. If not, you needed a better disc drive anyway.

World wide web is a perfect source for finding any information about any topic you are looking for. You can research a lot of information without leaving your desk. But most of the time a common problem is that you frequently waste an important portion of your valuable time with the irrevelant search results.

This article discusses the best ways to get better results from the search engines. To be able to receive the best results in terms of relevancy, you need to give some idea to the search engine. Although some people think of search engines as simple ask question and get answer robots, search engines do not programmed to work exactly in this manner. Instead, search engines work more like complicated database search and retrieval programs in which you direct the search engines about your query.

It is very important to give some idea to search engines about what you are looking for. What are you planning to find? Are you piling up any information regarding a comprehensive topic such as astrology? If any information coming out with the word “astrology” is important for you, then you are really lucky, because millions of search results will be available for you to analyze! And this is perfect solution for you if you are there to waste your spare time! Indeed irrevelant results bother many people because they try the first web site which came out as the result of search, and go to the next one, and then to the next one and so on. Altough many hours are spent in this trial and error method, the chances to reach the web site needed is still pretty low. The reason is that search engine will bring any website which includes the word “astrology” in any of its part. Can you imagine this? All the websites in world wide web with the tiny word “astrology”.

Being as specific as possible is the only best solution to get what you want. If you are in front of your computer with the idea of getting more information about “Chinese Astrology”, then immediately transfer this info to the search engine and type the phrase -Chinese Astrology- to the search engine. In this query, search engine will rank the web sites in an order of importance and will try to do its best to bring the websites which uses the terms “Chinese” and “astrology” at the same time according to their relevancy. You can get more relevant result by using quotes for the phrase you are searching. This way you command the search engine to give results containing both Chinese and astrology at the same time as one entity instead of retrieving one word and the other as seperate words. By doing this your search results will be filtered further and you will be closer to what you are looking for.

Web directories are great if you are already know what you are looking for. For specific queries you should prefer to look into directories other than search engines because they are organized to navigate back and forth of the directory tree with categories and sub- categories structure. Web directories may not give reference close to what you are looking for, but they are very time efficient and give perfect results since they are created according to specific topics and sub topics navigation needs.

No matter which search engine or directory you use to search the web for your needs, these tips will help you to get better results in your efforts to search the web time efficiently and get imddediate results!

Today we’re happy to be able to offer our readers a free registry scan courtesy of RegistryFix’s hugely popular software.

Registryfix will scan your system registry and
hard drive for invalid file and system references.

These invalid references may cause system instability, PC errors, constant crashes, and general system slowdowns.

• A Slow System?
• Harassed by DLL errors?
• Plagued by constant Blue Screens?
  
• Receiving error messages and
  don’t know why?

Did you know that most of these issues are easily repairable? Don’t pay a technician loads of money for an issue that you can easily repair yourself!

If your computer has been running particularly slowly, shutting down unexpectedly, or encountering errors with problems, you should be the first to take advantage of this offer!

The free scan will find errors relating to:

• Missing file associations
• Missing startup programs
• Invalid device drivers
• Invalid application paths
• Missing DLL files
• Missing help files
• Missing system fonts
• And much more!

Click here to scan your computer’s registry for errors now, free of charge!

Simple and (hopefully!) free procedures to handle unsuccessfully finalized DVDs, damaged DVDs or DVDs that have not been burned correctly by a video camcorder,recorder or burner and has some corrupt data.

It is a good idea for you to first consider other possible causes of what appear to be DVD errors such as a dirty disc surface, a dirty lens in the DVD reader or other software and hardware related problems. Prior to embarking on any of the following you need to eliminate all possible causes for having trouble with a DVD. Check to see your DVD burner has the latest firmware by going to the manufacturers website. Check to see if the media (brand and type) is compatible with your DVD burner/reader. Once you are certain that you have an unsuccessfully finalized DVD or a corrupt DVD you can get started.

Scratched DVD Disks

A simple visual inspection of the surface of the disc will tell you straight away whether your first problem is physical damage to the disc. If you can see a scratch or scratches on the surface then this may need to be addressed first. I say “may” because personally I use DVDFab to check to see if the disc will copy before I embark on any other course of action. DVDFab can read through a lot of surface errors because of its superior algorithms so I always take the lazy route and see if I can simply make a new copy. Now failing that you could go online and buy some expensive DVD scratch repair kit. Or you could do as I do and go to your local hardware store or even your own garage! All you will need is a bottle of any neutral colored (clear) car polishing product. Turtlewax happens to be the one I use. Take a VERY soft cloth (NOT paper towel), apply a little polish to the surface of the disc and GENTLY (remember, it’s not a car!) rub the disc. Use straight strokes from the centre of the disc to the outer edge and continue to do this until you can see the scratch either disappear or reduce noticeably. Then using the same motion and fresh cloth buff the disc back to its original shine. Now try it with DVDFab. If you are still unsuccessful repeat the process until you can be certain, again by visual inspection, that the problem is now not coming from a damaged disc surface.

DVD Data Repair/Recovery

The software you can use for this are DVDFab, Nero 8 (trial) and Isobuster. In the case of Isobuster you can try the free features first but failing that the full featured version needs to be purchased. A straight search of Yahoo or Google will find you the relevant sites.

Put the problem disc in the DVD drive of your computer then:

1. DVDFab. Try to use DVDFab first, as it has the best algorithms for reading anything on a DVD including how it integrates with the DVD drive, honestly sometimes I think it would read a bagel if you put it in there!

Select “DVD to DVD.” DVDFab will now try to read the contents of the disc and, if it can, write the contents to a folder on your hard drive. It is as simple as that. It is either going to work or not! If it does do it then the copy you now have on your hard drive will be fully repaired and you can then burn a new copy.

Failing that:

2. Isobuster. Using the free functions try to make a disc image file and burn to another DVD. Isobuster has three alternate methods of dealing with data corruption. It can replace the corrupted area with nothing, with fake data or with a series of zeros. It will give you the choice and just select them in order to try each until one works. Isobuster will not create the disc image file unless it knows it will be successful. If Isobuster has created the file (note where it was going to put it first!) you will have to re-name the extension to .iso. Use the disc image file to burn a new DVD disc. At this point, if you now have a new disc, you need to check that new one carefully. There is always the possibility that Isobuster has just made a perfect copy of your faulty disc! So now you have a brand new faulty disc!

Failing that: You will need to pay for the full version of Isobuster but ONLY buy it if you got this far. If Isobuster free couldn’t even read the disc then don’t bother.

>From this point forward the best you can hope for is the extraction of the MPEG video files or data files on the disc. You ARE going to lose the video menus and you may lose some of the video or data.

a. Start Isobuster then load the disc.

b. When Isobuster has detected the files on the disc run the “Find Missing Files and Folders” option under the “File” menu.

c. You will now have an entry on the left hand column of “files and folders found by their signature.”

d. Select that, then go to “File,” “Files found via their signature” then “Extract files found via their signature.” Choose a location and let it run.

Now you will have all the files where you selected them to go. The ones with the extension .VOB are the MPEG files from your disc wrapped in the VOB container. They can then be imported into a video editing program using the “Import DVD/VR” function or can be read by most DVD burning software.

Unfinalized discs.

If at all possible try to get the original device used to create the disc to finalize it. If this is not possible or the original device is failing to successfully finalize the disc you may have to resort to the Isobuster routine above.

If you have been left with an otherwise perfectly good disc, but unfinalized, do the following.

This requires Nero 8 (Trial version).

Go to the Nero website, download and install Nero 8. Yes, it’s big…sorry!

Place the unfinalized disc into the computer DVD tray. Open Nero 8 StartSmart.
Click “create and edit” at the top of the screen.
Click “author, edit and capture video.” NeroVision 5 will start.
Click on the disk tools drop down menu then click “finalize disk.”
In the option box that appears choose “no menus” and let it run.

Hopefully you now have a fully finalized disc that is readable.

Hope this helps!

Lance Carr
http://www.myeasydata.com

Did you know your computer may be riddled with spyware, embedded in hidden and seemingly innocent files that are being overlooked by your Virus checker?

If you use your computer for ANYTHING involving personal information – your address, your credit card details, passwords, etc. – it is essential to ensure that your computer is spyware free.

Built for those who enjoy knowing that they have complete control over the security of their PC, ParetoLogic Anti-Spyware delivers Active Protection in the form of real-time blocking. Sleek performance, an elegant user interface, and ease of use wrap around powerful technology and exclusive functionality. Going beyond simple detect and remove capabilities, ParetoLogic Anti-Spyware puts the power in your hands to take a pro-active stance against the intrusive and malicious spyware that threaten your PC and your privacy.

As well as offering you a FREE spyware check courtesy of XoftSpySE’s award winning ANTISPYWARE software, it is our pleasure to offer Trust Software readers both the full version of XoftSpySE’s AntiSpyware, but also REGCure Registry Cleaner for the bargain price of $39.90 – available for instant download!

Click here to find out more, and to get your free scan!

This article is set up in two parts, one part about RAM overview and a second part about RAM upgrade. If you are curious on how the RAM works, you will find a detail summary that should give you all the information that you need to know about RAM, organization and speed. If you just want to read the how to upgrade section, move on directly to part two Upgrade your laptop ram in 5 minutes or less.

1 – RAM Overview

There are two big categories of random access memories:

* Dynamic memories (DRAM, Dynamic Random Access Module), not very costly. They are in most cases used for the central memory of the computer

* Static memories (SRAM, Static Random Access Module), quick and expensive. SRAM is notably used for cache memories of the processor

Functioning of the random access memory

The random access memory is constituted of hundred of thousand small condensers storing charges. When it is loaded, the logical state of the condenser is equal to 1, otherwise it belongs to 0, what means that every condenser represents one bit of memory.

Given that condensers off-load, it is always necessary to recharge them in a space of regular time called cycle of refreshment. Memory DRAM requires cycles of refreshment for instance (Ns) is about 15 nanoseconds.

Every condenser is coupled with a transistor allowing to “recover « or to change the state of the condenser. These transistors are lined up in form of matrix, that is they achieve a hut memory (so called memory) by a line and a column.

So, for a memory of type DRAM, the time of access is of 60 nanoseconds (35ns of delay of cycle and 25 ns of time of latency). On a computer, the time of cycle corresponds contrary to the frequency of the clock, for instance for a computer pulsated in 200 MHz, the time of cycle is 5 ns (1 / (200*106)).

As a result a computer having a frequency well brought up and using memories the time of access of which is much longer than the time of cycle of the processor must perform cycles of wait to access to the memory. In the case of a computer pulsated in 200 MHz using memories of types DRAM (which the time of access is of 60ns), there are 11 cycles of wait as a cycle of transfer. The performances of the computer are of as much diminished as there are cycles

Formats of Random Access Memory (RAM)

There are numerous types of random access memories. These all come in the form of barrettes of memory attachable on the motherboard.

* SIMM (Single Inline Memory Module): it is about printed circuits among which one of the faces has fleas of memory. There are two types of barrettes SIMM, according to the number of connector cables (30 or 72)

* DIMM (Dual Inline Memory Modulates) are from memories 64 bits, what explains why it is not necessary to match them. Barrettes DIMM have fleas of memory on both sides of printed circuit and have also 84 connector cables on each side, what endows them with a total of 168 brooches. They have bigger dimensions than barrettes SIMM (130x25mm).

* RIMM (Rambus Inline Memory Module, conscripts also RD-RAM or DRD-RAM) are from memories 64 bits developed by the society Rambus. They have 184 brooches. These barrettes have two notches of location (détrompeurs), avoiding very risk of confusion with the previous modules. Considering their well brought up speed of transfer, barrettes RIMM have a thermal film made responsible for ameliorating the clearing up of warmth. As in the case of DIMM, there are modules of smaller size, called SO RIMM (Small Outline RIMM), intended for laptop computers. Barrettes SO RIMM include only 160 brooches.

* DRAM (Dynamic RAM, dynamic RAM) is the type of memo most spread at the beginning of the millennium. It is about a memory from which transistors are lined up in a matrix according to lines and of columns. A transistor, coupled with a condenser gives the information of a bit. 1 byte consisting of 8 bits, a barrette of memory 256 Mb DRAM will contain 256 therefore * 2^10 * 2^10 = 256 * on 1024 * on 1024 = 268 435 456 bytes = 268 435 456 * 8 = 2 147 483 648 bits = 2 147 483 648 transistors. A 256 Mb barrette has so in reality a capacity of 268 435 456 bytes, that is 268 Mb! These are memories from which the time of access is 60 ns. On the other hand, accesses memory are made in general on data lined up consecutively in memory. So the mode of access in gust (burst mode) allows to achieve the three successive data in the first one without time of additional latency.

* DRAM FPM to speed up accesses to DRAM, there is a technology, called pagination consisting in achieving data located on the same column by changing the address of the line only, what allows to avoid the repetition of the number of column between the reading of each of the lines. They speak then about DRAM FPM (Fast Page Mode). FPM allows to acquire time of access in the order of 70 – 80 nanoseconds for a frequency of functioning that can go from 25 to 33 Mhz.

* DRAM EDO (Extended Data Out, Goes out of data ameliorated sometimes also called “hyper-page”) appears in 1995. The technology used with this type of memory consists in addressing the following column during the reading of the data of a column. It creates an overlapping of accesses allowing to save time on every cycle. The time of access to memory EDO is therefore about 50 – 60 nanoseconds for a frequency of functioning going 33 – 66 Mhz. So, RAM EDO, when it is used in mode gust allows to acquire cycles of form 5-2-2-2, that is a benefit of 4 cycles on the access to 4 data. As much as memory EDO did not accept the upper frequencies in 66 Mhz, it disappeared in aid of SDRAM.

* SDRAM (Synchronous DRAM, translate synchronous RAM), appeared in 1997, allows a reading of data synchronized with the bus of the card-mother, contrary to memories EDO and FPM (qualified as asynchronous) having their own clock. SDRAM allows therefore to free itself from time of wait owed to synchronization with the card-mother. This one allows to acquire a cycle in mode gust of form 5-1-1-1, that is to say benefit of 3 cycles in comparison with RAM EDO. In that way SDRAM is able of working with a cadenza going until 150 Mhz, allowing him to acquire from time of access about 10 ns.

* DR-SDRAM (Direct Rambus DRAM or else RDRAM) is a type of memory allowing to transfer data on a bus of 16 wide bits to a cadenza of 800Mhz, what confers on him a band passer-by of 1,6 Go / s. As SDRAM, this type of memory is synchronized with the clock of the bus to ameliorate exchanges of data.

* DDR-SDRAM (Double Dated Miss SDRAM) is a memory based on technology SDRAM, allowing to double the rate of transfer of SDRAM with equal frequency. Reading or writing of data in memory am accomplished on the basis of a clock. Standard memory DRAM uses a method conscript SDR (Single Data Fails) consisting in reading or writing data in every forehead going up. DDR allows to double the frequency of reading / writings, with a clock pulsated in the same frequency, by sending data in every forehead going up, as well as in every downward forehead. Memory DDR has in general a commercial appellation of type PCXXXX where “XXXX ” represent the debit side in Mb / s.

* DDR2 (or DDR-II) allows to attain twice as well brought up debit sides as DDR with equal external frequency. They speak about QDR (Quadruple Dated Fail or quad-pumped) to indicate the method of reading and used writing. Memory DDR2 uses in effect two channels separated for reading and for writing, so it is able of sending or of accepting twice more data than DDR.

2 – Upgrading Your Laptop RAM

upgrading a notebook memory is a specific simple process pending that you have the right RAM and are somewhat delicate.

There are different types of RAM, and you must choose the one that is compatible with your notebook computer. Memory is also a fragile, so you need to be very cautious when installing it. You should ensure that the laptop is turned off and disconnected from any exterior power supply. No lights should be visible.

It is a lot easier to install RAM on a laptop versus a desktop PC. Access to the memory slots is via a panel generally located in the bottom of the laptop. Once you have opened this panel with a small screwdriver you can see the existing memory. you can check the exact type of memory that your Notebook currently uses, because it is usually shown on the front of the memory strips and will be evident when you open up the memory panel.

The memory strips are generally locked in with small clips on the ends of the strips. To take out existing memory, simply flip the clips and then remove the memory strips gently from their holding place. If you are simply adding memory, and there is space available, just add the new memory, gently pushing it in to ensure it is fully seated in the slots, and then push the clips to hold the new memory in place.

Once you have replaced or added your Notebook computer memory, replace the access panel, and then screw the panel back in place. Lastly, power up the notebook, When the PC starts up, it will count the memory and tell you how much RAM is loaded on your laptop.

As long as you have right memory, the whole operation should take less than 5 minutes, you can then enjoy your faster, less crash prone laptop.

When it comes to cleaning your keyboard there are many methods that can be used, some harder and more effective than others.

The easiest method is the Shake Method. It is so easy that you can do it right now. Pick up your keyboard, turn it over being careful not to press any keys, and shake it. See all of that stuff fall out? It is dirtier than you thought, isn’t it? You can use one of the following methods to clean it further.

The Blow Method – You can buy cans of pressurized air at the computer department or computer store which are made especially for cleaning your computer. They usually have either a hose and nozzle or a tube extending from the nozzle. Hold the keyboard up vertically (that means that end of the keyboard is up and the other end is down), aim towards the keys and press the button. Keep blowing until all of the debris is blown out. Be sure to get around and in between all of the keys. This can be done with the computer on, but it is better if it is off so that you do not have to worry about pressing the keys and coming up with a page of aaaaaaaaaaaaaaaaaaaaa’s.

The Vacuum Method – This is just like the Blow Method except that a vacuum is used instead of a can of pressurized air. It is quite simple. Just turn the vacuum on, pull out the hose, and run the nozzle over the keys. Before doing this make sure your keyboard does not have any loose pop off keys that could be sucked into the vacuum.

The Cotton Ball Method – This can be done in addition to the above methods and in lieu of the following methods. Take a cotton ball or cloth and wet it with rubbing alcohol. It should not be so wet that the alcohol runs down into the cracks of the keyboard. Wipe the tops and sides of the keys.

The Dishwasher Method – I hesitate to tell about this method because there is the possibility that it could fry your keyboard. When I had less experience with computers, I dunked my keyboard in a sink full of water to clean it. It did work afterwards, so I don’t doubt those who say this method will not mess up your keyboard, but if it does, don’t complain to me. I warned you. If your keyboard is not the standard membrane type of keyboard or if it is on a laptop, do not even think of trying this.

This is how you do it. Unplug the keyboard and place it face down in an empty dishwasher. Do not disassemble the keyboard and do not put it in a dishwasher that has dirty dishes in it. Some say to add soap, some say not to. Run the dishwasher through a regular cycle. Take the keyboard out, shake the water out, and stand it on end until it is completely dry (this may take several days). If it does not work after doing this, it may not be dry. Let it stand another week and try it again. If it still does not work, I warned you.

The Disassembly Method – This is the most thorough method, but it should not be done on laptop keyboards or non-standard non-membrane keyboards.

Turn off the computer and unplug the keyboard. Turn the keyboard upside down. You may want to get two books or short boards to place the keyboard on. Position them so that they hold up the keyboard on the edges when it is turned over. This should leave the keys dangling and not touching the books or the floor. This is especially needed when the keyboard’s back is off; otherwise the keys will be lifted out of their position by the floor (or whatever surface it is laying on).

Get a screwdriver and remove all of the screws from the back of the keyboard. Lay the keyboard down on the books and carefully remove the back.

Take everything apart and clean thoroughly. It is better to take the keys out one at a time and clean them so that you do not put them back in the wrong place. Wipe each one down with a wet cloth and then with a dry cloth. Any keys that may be hard to put back in, can be cleaned in place without removing them. Wipe around the keys as they sit in place and blow any debris out with your lungs (using compressed air or a vacuum may upset the keys). If you are really brave, you can remove all of the keys at once and give the frame a good wipe down too.

Do a once over and make sure that you have cleaned everything. Then reassemble it all.

Don’t forget the keyboard’s cable. Wrap a wet cloth around it and wipe it down. It may have an accumulation of grime that needs to be scrubbed off. Also if any of the letters on the keys have rubbed off, you can use a fine point permanent marker to draw the letter back on the key.

Use these cleaning methods and your keyboard will last a long time and be something you can be proud of.

Trying to find a place to watch TV online can be a bit of a minefield – some services prove to be out and out scams, others offer poor quality streams with frequent downtime, some charge hefty monthly subscriptions, or require costly and difficult to install hardware.

Satellite TV for PC, on the other hand offers you up to 3000 premium channels from around the world, for a small one-off fee. No hardware is required, simply install the software from the link that you will receive upon purchase.

What kind of channels?

And remember – all of these are available internationally – a great way for UK and European fans of US shows to check them out before they arrive on conventional TV.

3000 channels for a one-off fee. No catches. Our verdict? It sure beats cable!

Its our pleasure at Trust Software to be able to offer you a huge discount on Satellite TV for PC -

This package retails for over $350.00. Through this special limited time offer pay only $49.95!

You save $300.00!

Click here to check it out! You could be watching TV channels from around the world on your PC or laptop within minutes!

Please note that given the huge discount, this is a limited time offer, and may be removed without notice.

To disinfect the keyboard, turn off the computer. Then spray disinfectant on a cloth. Be sure to use disinfectant and not just any type of cleaner because not all cleaners disinfect. Also do not spray the disinfectent directly on the keys. Spray it on the cloth. Wipe down the top and sides of the keys. Give the keys a few minutes to dry off before turning the computer back on.

Now that you know how to do it, you should make it a regular practice to disinfect the keyboard. It’s one step towards a healthier you.

So you have your keyboard disinfected and life is great. Then your child spills koolaide all over it. What do you do? There are certain steps that you should take when something, like pop, beer, wine, coffee, milk, or kool-aide, is spilled on the keyboard.

The first thing to do is immediately unplug the keyboard from the back of the computer and turn the keyboard over so that its keys are down. This will allow the liquid to drain out. You will probably want to put a cloth under the keyboard or at least make sure that the surface you have put it on is washable.

Then use the mouse to shut down Windows and turn off the computer (this is important because later you will have to plug the keyboard back into the computer and you should never plug any device into a computer while it is on).

While the keyboard is upside down use a cloth to dry as much of the liquid off as you can. If you have a can of compressed air or a vacuum, while the keyboard is upside down blow or vacuum it out. Then let the keyboard set upside down for at least a night so that it can adequately dry out.

If the liquid that spilled on it was sticky, you may want to follow the extensive cleaning procedure explained in the next article, How to Clean your Keyboard – Part 2.

Liquid spilled on a laptop keyboard can easily reach the hard drive, so turn it over immediately and leave it in that position until it dries.

Keyboards are quite resilient and so it should work when you turn it on again. But if not, another attribute of keyboards is that they are cheap and so it won’t cost too much to buy another one.

With these pointers in mind and a quick reaction, you just may save your keyboard from total destruction the next time it gets coated with coffee.
Come back for part 2 later this week!